Công ty Môi Trường Hành Trình Xanh hân hạnh là nhà nhập khẩu và phân phối độc quyền Van Điện Từ ACL - ITALYtại Việt Nam. Chúng tôi cam kết cung cấp sản phẩm và dịch vụ tốt nhất tới Quý Khách hàng.
Expertise
ACL S.r.l. is manufacturing a wide range of solenoid valves in different versions since 1987.
Being focused on the satisfaction of customers’ needs, ACL is available to deal with all kind of requests concerning both standard and special products.
ACL’s expertise is testified by the large number of customers worldwide, which are acting in all the industrial fields where the control of fluid is necessary.
Quality
The high quality of the raw materials used, the precision of the parts, the hard tests carried out during manufacturing process and final testing, together with the large monthly quantity of valves produced are a guarantee of reliability.
Experience
ACL’s valves are employed in a large variety of industrial sectors: water treatment, electrical appliances, industrial process, heating and air-conditioning, medical equipment, automotive, textile, food, pneumatic and many others. A worldwide sales network allows ACL to be present in the solenoid valve markets of the most important Countries.
1. Type number composition for servo-assisted versions
Example E207IV50///20E Solenoid valve suitable for AC and DC, 2/2 Normally open, connections G2, FPM seal, orifice Ø50mm. Coil type 2, insulation class “F”, power 15VA, voltage 220-230V 50/60Hz
2. Type number composition for direct-acting versions
Example E105AB15///301 Solenoid valve suitable for AC and DC, 2/2 Normally closed, connections G1/8, NBR seal, orifice Ø1,5mm. Coil type 3, insulation class “F”, power 6,5Watt, voltage 24VDC
3. Type number composition for coils
Example : 30B Coil width 22 mm in Nylon 6+18% Fibre Glass Insulation class F Voltage 24V 50/60Hz power 8VA
4. Seal Materials
Designation
Commercial Denomination
General characteristics
Typical Application
NBR
(Acrylic-nitrile butadylene)
BUNA -N PERBUNAN ELAPRIM
JSR-N
Synthetic elastomer with good mechanical and thermal properties. Good resistance to oils.
Poor resistance to ozone and atmospheric derivates.
Water at max temp. 70°C;
Air with max temp. 90°C; Mineral oils and their derivatives, hydrocarbons; methane; ethane; propane; butane; kerosene & fuel oil.
EPDM
(Ethylene-propylene-dylene)
BUNA – AP DUTRAL NORDEL
Synthetic elastomer derived from the co-polymerization of ethylene and propylene. Suitable for use with non-phosporic based hydraulic fluids. Water and steam to a max temp. of 140°C. Not suitable for use with mineral based products (oil, fats, fuel oils and petrol)
Hot water and steam; detergents; potassium and sodium solutions. Hydraulic fluids;polarised solvents; Skydrol 500 and 700 *
FPM
(Fluorocarbon)
VITON
TECNOFLON
FLUOREL
A sysnthetic elastomer derived from fluirine-propylene. Excellent resistance to the high temp. Excellent resistance to ozone, oxygen, mineral oils, synthetic hydraulic oil, petrol, hydro-carbons and many other chemical agents. Not suitable for use with superheated steam.
For general uses up to 130°C
PTFE
(Polytetra-
fuorethylene)
TEFLON
Thermoplastic material used also filled with a mineral resin. Excellent resistance to many chemicals. Optimum high temp. Resistance. Poor charpy, improved by adding mineral filling.
